Mitsubishi MELSEC-Q Series User Manual page 297

9
UTILITY OPERATION
(1) I/O assignment setting screen
I/O assignment setting
System setting
Item
Slot
Type
I/O
assign-
ment
Model name
Points
Start XY
button
Switch setting
button
Detail setting
Figure 9.41 I/O assignment setting screen
Table9.25 Explanation of I/O assignment setting screen
Multiple CPU setting
Displays the "Slot No." of the mounted module, the stage No. of the base
unit mounted with the module, and the installation position on the base
unit.
Specify the type of the mounted module.
In a multiple CPU system configuration, no error will be displayed even if
"CPU (Empty)" is set to the position not supported by the C Controller
module. Check for incorrect setting.
(Initial value: " " (Blank), Setting range: " " (Blank), "Empty", "Input", "Hi.
input", "Output", "I/O mix", "Intelli.", "Interrupt", "No. 1"
*1
"CPU (Empty)" )
Enter the model name of the mounted module.
Specify the I/O points when changing the I/O points of each slot.
(Initial value: " " (Blank), Setting range: 0, 16, 32, 48, 64, 128, 256, 512,
1024)
Specify the I/O No. when changing the I/O No. of each slot.
Opens the "Switch setting for I/O and intelligent function module" screen.
Opens the "Intelligent function module detailed setting" screen.
* 1 Can be set only in a multiple CPU system configuration.
9.2.8 Operating I/O assignment setting screen
Communication diagnostics
Description
*1
, to "No. 4"
9.2 C Controller Setting Utility
9
10
11
12
13
Reference
section
6.6.2
14
6.6.2,
12.2.2
*1
,
6.6.2
15
6.6.2
6.6.2
This section
(2)
This section 16
(3)
(To next page)
9
- 47