Mitsubishi MELSEC-Q Series User Manual page 282

9
UTILITY OPERATION
Item
System configuration
Slot
Type
Series
Model name
Points
Start I/O No.
Control CPU
Serial No.
Ver.
button
Save system information
button
Select
button
Close
Remark
9
- 32 9.2 C Controller Setting Utility
9.2.5 Operating Module monitor screen
Table9.14 Explanation of System information screen (Continued)
Displays the information of the modules that comprise the C Controller
system.
Double-clicking a module (or selecting a module and pressing the [Enter]
key) closes the system information screen and displays the module
monitor screen for the module.
In a single CPU system, however, selection of CPU module is not
allowed.
Displays the "Slot No." of the module, the stage No. of the base unit
where the module is installed, and the installation position within the base
unit.
Displays the type of the module.
(Display range: "Empty", "Input", "Hi. input", "Output", "I/O mix", "Intelli.",
"Interrupt", "CPU")
Displays the series name of the module.
(Display range: "Q" (fixed))
Displays the model name of the module.
Displays the I/O points of the module.
(Display range: 0, 16, 32, 48, 64, 128, 256, 512, 1024)
Displays the start I/O No. of the module.
(Display range: 0000 to 0FF0, 3E00 to 3E30)
Displays the CPU No. of the control CPU of the module.
(Display range: "No. 1" to "No. 4")
Displays the serial No. of the module.
Displays the function version of the module.
Saves the displayed C Controller system information into the system
information save file.
Selecting a module and pressing the
information" screen and displays the module monitor screen for the
information of the selected module.
Closes the system information screen.
The information of the "System information" screen is based on the time when the
"System information" screen is opened.
To update the information, close and reopen the "System information" screen.
Description
button closes the "System
Select
Reference
section
This section
(4)
This section
(2)