Mitsubishi MELSEC-Q Series User Manual page 382

9
UTILITY OPERATION
(2) Access that does not require the logical station No. setting
Other station MELSECNET/H module
9
- 132 9.4 MELSECNET/H Utility
9.4.7 Operating Target setting screen
For accessing to the following, use the station No. of the other station MELSECNET/H
module.
There is no need to set the logical staiton No.
Figure 9.99 Access that does not require the logical station No. setting
Control CPU of other station
MELSECNET/H module