Mitsubishi MELSEC-Q Series User Manual page 615

18
TROUBLESHOOTING
(5) Corrective actions for "MUtllfCom" events by event Nos.
Event No.
0xC0000000 A packet illegal error occurred.
0xC0000001 An instruction error occurred.
0xC0000002 A socket generation error occurred.
0xC0000003 A port acquisition error occurred.
0xC0000004 A bind error occurred.
(6) Corrective actions for "MMain" events by event Nos.
Event No.
0xC0000110 A script execution error occurred.
One command (one line) in the script file has 129 or more characters.
0xC0000111 (The C Controller module is in the status of a stop error [CPU error
code 2502], and stops executing the script command.)
0xC0000330 Failed in LAN access.
Corrective actions for events that may occur in "MUtllfCom" are listed below by event
Nos.
Table18.16 Corrective actions for "MUtllfCom" events by event Nos.
Event
Corrective actions for events that may occur in "MMain" are listed below by event
Nos.
Table18.17 Corrective actions for "MMain" events by event Nos.
Event
Check the port No. used and change it if
necessary.
Change the IP address.
Check the utility and C Controller module
versions.
Restart the C Controller module.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
Check the port No. used.
Check for overlap between the C Controller
module ports.
Restart the C Controller module.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
A system error in the C Controller module is
probable.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
Correct or delete the description of the script
file where the error occurred, and restart the C
Controller module.
( Section 18.3 (3) error code 2502)
The parameter file (IP address setting area)
does not exist. Using the C Controller setting
utility, set the IP address or write the
parameters.
A system error in the C Controller module is
probable.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
18.4 Error Code and Error Message Lists
18.4.2 Actions by Event No.
Corrective action
Corrective action
18
- 55
17
18