17
STARTING MULTIPLE CPU SYSTEM
17.2.3 When creating new
Start the C Controller setting utility.
Connect to the C Controller module.
Basic
Note17.1
íç1
When the Basic model QCPU is used, do not set "4" to No of CPU since the number of
Basic
mountable CPU modules is limited up to 3.
Note17.1
systemíç1
Start
(To next page)
17.2 Setting Parameters Added for Multiple CPU System
"Points occupied by empty slot" (optional) on
<<System setting>> tab
Set the points to be occupied by one empty slot.
Default: 16 points
"No. of CPU" (setup required) on <<Multiple CPU setting>>
tab
Set the number of CPU modules to be mounted on the
main base unit in the multiple CPU system. Note 17.1
17.2.3 When creating new system
17
18
Note17.1
17
- 6