Icons To Be Registered - Mitsubishi MELSEC-Q Series User Manual

8
INSTALLING AND UNINSTALLING SW[]PVC-CCPU

8.3 Icons to be Registered

Once SW PVC-CCPU is installed, the following icons are registered to the location
displayed by [Start]
8
- 6 8.3 Icons to be Registered
[All Programs]
Icon Name
Bus interface function HELP
C Controller setting utility
CC-Link utility
Device monitor utility
MELSEC data link function HELP Starts the MELSEC data link function HELP.
MELSECNET_H utility
[MELSEC]
Table8.2 Icons registered to Start menu
Starts the bus interface function HELP.
Starts the C Controller setting utility.
Starts the CC-Link utility.
Starts the Device monitor utility.
Starts the MELSECNET/H utility.
[C Controller].
Description