Operating System Menu - Mitsubishi MELSEC-Q Series User Manual

9
UTILITY OPERATION

9.4.8 Operating system menu

(1) System menu
Item
Move, Minimize, Close
C Controller setting utility
Device monitor utility
Version information
(2) Version information screen
Item
Software package
SW PVC-CCPU-EAF10 Version
MELSECNET/H utility
button
OK
Open and use the system menu of the MELSECNET/H utility by any of the following
three methods.
• Right-click on the title bar.
• Click the icon ( ) on the title bar.
• Press the [Alt] key and then the [ ] key.
Figure 9.100 System menu
Table9.89 Explanation of System menu
Refer to the Microsoft Windows
Starts the C Controller setting utility. (
During online connection, the connection target setting of the C Controller setting utility
is the same as that of the MELSECNET/H utility.
Starts the Device monitor utility. (
During online connection, the connection target setting of the Device monitor utility is the
same as that of the MELSECNET/H utility.
Opens the "Version information" screen. (
Displays the version information of the MELSECNET/H utility.
Figure 9.101 Version information screen (Example: Version 2.00A)
Table9.90 Explanation of Version information screen
Displays the version of SW PVC-CCPU.
Displays the update date of the MELSECNET/H utility.
Closes the "Version information" screen.
Description
R R manual.
Section 9.2)
Section 9.5)
This section (2))
Description
9.4 MELSECNET/H Utility
9.4.8 Operating system menu
9
10
11
12
13
14
15
16
9
- 133