Mitsubishi MELSEC-Q Series User Manual page 298

9
UTILITY OPERATION
I/O assignment setting
System setting
Item
Base model
Power model
Extension cable
Slots
Base
setting
Base mode
,
8 slot default
button
12 slot default
Import multiple CPU parameter
button
button
Default
(2) Switch setting for I/O and intelligent function module screen
Table9.26 Explanation of switch setting for I/O and intelligent function module screen
Item
Input format
Slot, Type, Model name
*1
Switch 1 to Switch 5
button
End
button
Cancel
9
- 48 9.2 C Controller Setting Utility
9.2.8 Operating I/O assignment setting screen
Table9.25 Explanation of I/O assignment setting screen (Continued)
Multiple CPU setting
Set the model name of the base unit.
Set the model name of the power supply module installed.
Set the model name of the extension cable.
Specify the number of the slots of the base unit.
(Initial value: None, Setting range: 2, 3, 5, 8, 10, 12)
Select the base mode from "Auto" and "Detail".
(Initial value: "Auto", Setting range: "Auto", "Detail")
Batch-sets the base unit to the specified number of slots.
Reads the multiple CPU system parameter area from the file created by
GX Developer.
Changes the settings to the initial values.
Set the I/O module and intelligent function module switches.
Figure 9.42 Switch setting for I/O and intelligent function module screen
Select the numerical input format from BIN., DEC. and HEX.
(Initial value: "HEX.", Setting range: "BIN.", "DEC.", "HEX.")
Displays the "Slot", "Type", and "Model name" set on the "I/O assignment
setting" screen.
Set the switches of the intelligent function module.
Saves the settings and closes the "Switch setting for I/O and intelligent
function module " screen.
Closes the "Switch setting for I/O and intelligent function module" screen
without saving the settings.
* 1 In a multiple CPU system configuration, the data set in this item must be identically set to each of
all CPUs.
Communication diagnostics
Description
Description
Reference
section
6.3
6.3
6.3
9.2.12
Reference
section
4.12
This section
(1)
4.12