D-Link DWS-1008 User Manual page 127

Wireless 8 port switch with poe
Hide thumbs Also See for DWS-1008:
Table of Contents

Advertisement

DWS-1008 User's Manual
• ClientDot1xFailureTraps - Generated when a client experiences an 802.1X
failure.
• ClientRoamingTraps - Generated when a client roams.
• CounterMeasureStartTraps - Generated when MSS begins
countermeasures against a rogue access point.
• CounterMeasureStopTraps - Generated when MSS stops countermeasures
against a rogue access point.
• DAPConnectWarningTraps - generated when a Distributed AP whose
fingerprint has not been configured in MSS establishes a management session
with the switch.
• DeviceFailTraps - Generated when an event with an Alert severity occurs.
• DeviceOkayTraps - Generated when a device returns to its normal state.
• LinkDownTraps - Generated when the link is lost on a port.
• LinkUpTraps - Generated when the link is detected on a port.
• MichaelMICFailureTraps - Generated when two Michael message integrity
code (MIC) failures occur within 60 seconds, triggering Wi-Fi Protected
Access (WPA) countermeasures.
• MP BootTraps - Generated when a DWL-8220AP boots.
• MP TimeoutTraps - Generated when an access point fails to respond to
the DWS-1008 switch.
• PoEFailTraps - Generated when a serious PoE problem, such as a short
circuit, occurs.
• RFDetectAdhocUserTraps - Generated when MSS detects an ad-hoc user.
• RFDetectRogueAPTraps - Generated when MS detects a rogue access
point.
• RFDetectRogueDisappearTraps - Generated when a rogue access point is
no longer being detected.
D-Link Systems, Inc.
Configuring SNMP
122

Advertisement

Table of Contents
loading

Table of Contents