Clearing The Trace Log; List Of Trace Areas; Using Show Commands; Viewing Vlan Interfaces - D-Link DWS-1008 - AirPremier MobileLAN Switch Product Manual

To clear all messages from the trace log buffer, type the following command:
DWS-1008# clear log trace
To see all MSS areas you can trace, type the following command:
DWS-1008# set trace ?
To troubleshoot the switch, you can use show commands to display information about different areas
of the MSS. The following commands can provide helpful information if you are experiencing MSS
performance issues.
To view interface information for VLANs, type the following command:
DWS-1008# show interface
* = From DHCP
VLAN Name
-------------------------------------------------------------------------------------------------------------------
1 default
130 vlan-eng
190 vlan-wep
D-Link DWS-1008 User Manual

Clearing the Trace Log

List of Trace Areas

Using Show Commands

Viewing VLAN Interfaces

Address
0.0.0.0
192.168.12.7
192.168.19.7
Mask Enabled
0.0.0.0 NO
255.255.255.0 YES
255.255.255.0 YES
State RIB
Down ipv4
Up ipv4
Up ipv4
8