D-Link DWS-1008 User Manual page 43

DWS-1008 User's Manual
Parameter
psk-phrase
psk-raw
rsn-ie
shared-key-auth
ssid-name
ssid-type
tkip-mc-time
web-aaa-form
wep key-index
wep active-
multicast-index
wep active-
unicast-index
wpa-ie
D-Link Systems, Inc.
Configuration (continued)
Default Value
No passphrase
defined
No preshared
key defined
disable
disable
default
crypto
60000
Not configured
No keys defined
1
1
disable
Radio Behavior When Parameter Set To Default Values
Uses dynamically generated keys rather than
statically configured keys to authenticate WPA
clients.
Uses dynamically generated keys rather than
statically configured keys to authenticate WPA
clients.
Does not use the RSN IE in transmitted frames.
Does not use shared-key authentication. This
parameter does not enable PSK authentication for
WPA. To enable PSK encryption for WPA, use the
set radio-profile auth-psk command.
Uses the SSID name default.
Encrypts wireless traffic for the SSID.
Uses Michael countermeasures for 60,000 ms
(60 seconds) following detection of a second MIC
failure within 60 seconds.
For WebAAA users, serves the default login web
page or, if configured, the SSID-specific login web
page.
Uses dynamic WEP rather than static WEP.
Uses WEP key 1 for static WEP encryption of
multicast traffic if WEP encryption is enabled and
keys are defined.
Uses WEP key 1 for static WEP encryption of
unicast traffic if WEP encryption is enabled and
keys are defined.
Does not use the WPA IE in transmitted frames.
Configuration
38