D-Link DWS-1008 User Manual page 85

DWS-1008 User's Manual
boundary. To display all entries in the forwarding database, type the following command:
DWS-1008# show fdb all
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG
----------------------------------------------------------------------------------------------------------------------
1
1
1
Total Matching FDB Entries Displayed = 3
To display all entries that begin with 00, type the following command:
DWS-1008# show fdb 00:*
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG
------------------------------------------------------------------------------------------------------------------------
1
1
Total Matching FDB Entries Displayed = 2
Adding an Entry to the Forwarding Database
To add an entry to the forwarding database, use the following command:
set fdb {perm | static} mac-addr port port-list vlan vlan-id [tag tag-value]
To add a permanent entry for MAC address 00:bb:cc:dd:ee:ff on ports 3 and 5 in VLAN
blue, type the following command:
DWS-1008# set fdb perm 00:bb:cc:dd:ee:ff port 3,5 vlan blue
success: change accepted.
To add a static entry for MAC address 00:2b:3c:4d:5e:6f on port 1 in the default VLAN, type
the following command:
DWS-1008# set fdb static 00:2b:3c:4d:5e:6f port 1 vlan default
success: change accepted.
Removing Entries from the Forwarding Database
To remove an entry from the forwarding database, use the following command:
clear fdb {perm | static | dynamic | port port-list} [vlan vlan-id] [tag tag-value]
To clear all dynamic forwarding database entries that match all VLANs, type the following
command:
D-Link Systems, Inc.
Dest MAC/Route Des
00:01:97:13:0b:1f
aa:bb:cc:dd:ee:ff
00:0b:0e:02:76:f5
Dest MAC/Route Des
00:01:97:13:0b:1f
00:0b:0e:02:76:f5
Configuring and Managing Ports and VLANs
[CoS] Destination Ports
1
* 3
1
[CoS] Destination Ports
1
1
[Protocol Type]
[ALL]
[ALL]
[ALL]
[Protocol Type]
[ALL]
[ALL]
80