Displaying 802.1X Information - D-Link DWS-1008 User Manual

DWS-1008 User's Manual
Setting the 802.1X Timeout for a Client
Use the following command to set the number of seconds before the switch times out an
authentication session with a supplicant (client):
set dot1x timeout supplicant seconds
The default is 30 seconds. The range of time is from 1 to 65,535 seconds.
For example, type the following command to set the number of seconds for a timeout to
300:
DWS-1008# set dot1x timeout supplicant 300
success: dot1x supplicant timeout set to 300.
Type the following command to reset the timeout period:
DWS-1008# clear dot1x timeout supplicant
success: change accepted.

Displaying 802.1X Information

This command displays 802.1X information for clients, statistics, VLANs, and configuration.
show dot1x {clients | stats | config}
• show dot1x clients displays the username, MAC address, VLAN, and state of active
802.1X clients.
• show dot1x config displays a summary of the current configuration.
• show dot1x stats displays global 802.1X statistical information associated with
connecting and authenticating.
D-Link Systems, Inc.
Managing 802.1X
335