D-Link DWS-1008 User Manual page 253

DWS-1008 User's Manual
DWS-1008# show security acl info all
ACL information for all
set security acl ip acl-111 (hits #4 0)
----------------------------------------------------
1. permit IP source IP 192.168.254.12 0.0.0.0 destination IP any
2. permit IP source IP 192.168.253.11 0.0.0.0 destination IP any
set security acl ip acl-2 (hits #1 0)
----------------------------------------------------
1. permit L4 Protocol 115 source IP 192.168.1.11 0.0.0.0 destination IP
192.168.1.15 0.0.0.0 precedence 0 tos 0 enable-hits
Clearing Security ACLs from the Edit Buffer
Use the rollback command to clear changes made to the security ACL edit buffer since it was
last committed. The ACL is rolled back to its state at the last commit command. For example,
suppose you want to remove an ACE that you just created in the edit buffer for acl-111:
1. To display the contents of all committed security ACLs, type the following command:
DWS-1008# show security acl info all
ACL information for all
set security acl ip acl-111 (hits #4 0)
----------------------------------------------------
1. permit IP source IP 192.168.254.12 0.0.0.0 destination IP any
2. permit IP source IP 192.168.253.11 0.0.0.0 destination IP any
set security acl ip acl-2 (hits #1 0)
----------------------------------------------------
1. permit L4 Protocol 115 source IP 192.168.1.11 0.0.0.0 destination IP
192.168.1.15 0.0.0.0 precedence 0 tos 0 enable-hits
2. To view a summary of the security ACLs for which you just created ACEs in the edit
buffer, type the following command:
DWS-1008# show security acl editbuffer
ACL edit-buffer table
ACL
--------------------------------------------------------
acl-a
acl-111
3. To view details about these uncommitted ACEs, type the following command. The
entire acl-111 is displayed, including its committed ACEs.
D-Link Systems, Inc.
Type Status
IP Not committed
IP Not committed
Configuring and Managing Security ACLs
248