D-Link DWS-1008 User Manual page 47

DWS-1008 User's Manual
The following command configures radio 1 (the 802.11b/g radio) on Distributed AP 1 to use
external antenna model ANT1060*:
DWS-1008# set dap 1 radio 1 antennatype ANT1060
success: change accepted.
To enable or disable RF Auto-Tuning for channel or power assignment, use the following
commands:
set radio-profile name auto-tune channel-config {enable | disable}
set radio-profile name auto-tune power-config {enable | disable}
Applying a Radio Profile to Radios and Enabling the Radios
To apply a radio profile to radios, use the following command:
set {ap port-list | dap dap-num} radio {1 | 2} radio-profile name
mode {enable | disable}
The following commands applies radio profile rp1 to radio 1 on AP access ports 1, 2, and 4
and on Distributed AP 1 and Distributed AP 2 and enables the radios:
DWS-1008# set ap 1,2,4 radio 1 radio-profile rp1 mode enable
success: change accepted.
DWS-1008# set dap 1,2 radio 1 radio-profile rp1 mode enable
success: change accepted.
The following command applies radio profile rp1 to radio 2 on AP access ports 1, 2, and 4
and on Distributed AP 1 and enables the radios:
DWS-1008# set ap 1,2,4 radio 2 radio-profile rp1 mode enable
success: change accepted.
DWS-1008# set dap 1 radio 2 radio-profile rp1 mode enable
success: change accepted.
D-Link Systems, Inc.
Configuration (continued)
Configuration
42