D-Link DWS-1008 User Manual page 109

DWS-1008 User's Manual
Clearing the Time Zone
To clear the time zone, use the following command:
clear timezone
Configuring the Summertime Period
The summertime period offsets the system time +1 hour and returns it to standard time for
daylight savings time or a similar summertime period that you set.
Note: Configure summertime before you set the time and date. Otherwise, summertime's
adjustment of the time will make the time incorrect, if the date is within the summertime
period.
To configure the summertime period, use the following command:
set summertime summer-name [start week weekday month hour min end week weekday
month hour min]
The summer-name can be up to 32 alphanumeric characters long, with no spaces. The start
and end dates and times are optional. If you do not specify a start and end time, MSS
implements the time change starting at 2:00 a.m. on the first Sunday in April and ending at
2:00 a.m. on the last Sunday in October, according to the North American standard.
To set the summertime period to PDT (Pacific Daylight Time) and use the default start and
end dates and times, type the following command:
DWS-1008# set summertime PDT
success: change accepted.
Displaying the Summertime Period
To display the summertime period, use the following command:
show summertime
For example, to display the summertime period, type the following command:
DWS-1008# show summertime
Summertime is enabled, and set to 'PDT'.
Start : Sun Apr 04 2004, 02:00:00
End : Sun Oct 31 2004, 02:00:00
Offset : 60 minutes
Recurring : yes, starting at 2:00 am of first Sunday of April
and ending at 2:00 am on last Sunday of October.
D-Link Systems, Inc.
Configuring and Managing IP Interfaces and Services
104