D-Link DWS-1008 User Manual page 252

DWS-1008 User's Manual
DWS-1008# show security acl info all
ACL information for all
set security acl ip acl-111 (hits #4 0)
----------------------------------------------------
1. deny IP source IP 192.168.254.12 0.0.0.255 destination IP any
2. permit IP source IP 192.168.253.11 0.0.0.0 destination IP any
set security acl ip acl-2 (hits #1 0)
----------------------------------------------------
1. permit L4 Protocol 115 source IP 192.168.1.11 0.0.0.0 destination IP
192.168.1.15 0.0.0.0 precedence 0 tos 0 enable-hits
Modifying an Existing Security ACL
You can use the modify editbuffer-index portion of the set security acl command to modify
an active security ACL. For example, suppose the ACL acl-111 currently blocks some packets
from IP address 192.168.254.12 with the mask 0.0.0.255 and you want to change the ACL to
permit all packets from this address. Follow these steps:
1. To display all committed security ACLs, type the following command:
DWS-1008# show security acl info all
ACL information for all
set security acl ip acl-111 (hits #4 0)
----------------------------------------------------
1. deny IP source IP 192.168.254.12 0.0.0.255 destination IP any
2. permit IP source IP 192.168.253.11 0.0.0.0 destination IP any
set security acl ip acl-2 (hits #1 0)
----------------------------------------------------
1. permit L4 Protocol 115 source IP 192.168.1.11 0.0.0.0 destination IP
192.168.1.15 0.0.0.0 precedence 0 tos 0 enable-hits
2. To modify the first ACE in acl-111, type the following commands:
DWS-1008# set security acl ip acl-111 permit 192.168.254.12 0.0.0.0 modify 1
DWS-1008# commit security acl acl-111
success: change accepted.
3. To view the results, type the following command:
D-Link Systems, Inc.
Configuring and Managing Security ACLs
247