D-Link DWS-1008 User Manual page 211

DWS-1008 User's Manual
To display the RF AutoTuning and other individual radio settings on both radios on the
Distributed AP access point configured on connection 1, type the following command:
DWS-1008# show dap config 1
Dap 1: serial-id: 12345678, AP model: dwl-8220ap, bias: high, name: DAP01
fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3
boot-download-enable: YES
load balancing group: none
Radio 1: type: 802.11g, mode: disabled, channel: 6
tx pwr: 1, profile: default
auto-tune max-power: default, min-client-rate: 5.5, max-retransmissions: 10
Radio 2: type: 802.11a, mode: disabled, channel: 36
tx pwr: 1, profile: default
auto-tune max-power: default, min-client-rate: 24, max-retransmissions: 10
Displaying RF Neighbors
To display the other radios that a specific D-Link radio can hear, use the following
commands:
show auto-tune neighbors [ap ap-num [radio {1 | 2| all}]]
show auto-tune neighbors [dap dap-num [radio {1 | 2| all}]]
The list of radios includes beaconed third-party SSIDs, and both beaconed and unbeaconed
D-Link SSIDs.
To display neighbor information for radio 1 on the directly connected DWL-8220AP access
point on port 2, type the following command:
DWS-1008# show auto-tune neighbors ap 2 radio 1
Total number of entries for port 2 radio 1: 5
Channel
---------------------------------------------------------------------------
1
1
1
1
1
D-Link Systems, Inc.
Neighbor BSS/MAC
00:0b:85:06:e3:60
00:0b:0e:00:0a:80
00:0b:0e:00:d2:c0
00:0b:85:06:dd:00
00:0b:0e:00:05:c1
Configuring RF Auto-Tuning
RSSI
-46
-78
-74
-50
-72
206