D-Link DWS-1008 User Manual page 67

DWS-1008 User's Manual
administrative users, but to unconditionally allow access for administrative and console
users if the RADIUS server (in this case, server r1 in server group sg1) does not respond.
To configure unconditional authentication, Natasha sets the authentication method to none.
She types the following commands in this order:
DWS-1008# set user natasha password m@Jor
User natasha created
DWS-1008# set radius server r1 address 192.168.253.1 key sunFLOW#$
success: change accepted.
DWS-1008# set server group sg1 members r1
success: change accepted.
DWS-1008# set authentication console * sg1 none
success: change accepted.
DWS-1008# set authentication admin * sg1 none
success: change accepted.
DWS-1008# save config
success: configuration saved.
D-Link Systems, Inc.
Configuring AAA for Administrative and Local Access
62