D-Link DWS-1008 User Manual page 192

DWS-1008 User's Manual
Displaying RSN Settings
To display the RSN settings in a service profile, use the following command:
show service-profile {name | ?}
The RSN settings appear at the bottom of the output.
Note. The RSN-related fields appear in the show service-profile output only when RSN is
enabled.
Assigning the Service Profile to Radios and Enabling the Radios
After you configure RSN settings in a service profile, you can map the service profile to a radio
profile, assign the radio profile to radios, and enable the radios to activate the settings.
To map a service profile to a radio profile, use the following command:
set radio-profile name service-profile name
To assign a radio profile to radios and enable the radios, use the following command:
set ap port-list radio {1 | 2} radio-profile name mode {enable | disable}
To map service profile rsn to radio profile bldg2, type the following command:
DWS-1008# set radio-profile blgd2 service-profile rsn
success: change accepted.
D-Link Systems, Inc. D-Link Systems, Inc.
Configuring User Encryption
187 187