D-Link DWS-1008 User Manual page 368

DWS-1008 User's Manual
Displaying Rogue Clients
To display the wireless clients detected by a DWS-1008 switch, use the following command:
show rfdetect clients [mac mac-addr]
The following command shows information about all wireless clients detected by a switch's
APs:
DWS-1008# show rfdetect clients
Total number of entries: 30
Client MAC
-----------------------------------------------------------------------------------------------------------------------
00:03:7f:bf:16:70
00:04:23:77:e6:e5 Intel
00:05:5d:79:ce:0f
00:05:5d:7e:96:a7 D-Link
00:05:5d:7e:96:ce D-Link
00:05:5d:84:d1:c5 D-Link
The following command displays more details about a specific client:
DWS-1008# show rfdetect clients mac 00:0c:41:63:fd:6d
Client Mac Address: 00:0c:41:63:fd:6d, Vendor: D-Link
Port: dap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago): 84
Bssid: 00:0b:0e:01:02:00, Vendor: D-link, Type: intfr, Dst: ff:ff:ff:ff:ff:ff
Last Rogue Status Check (secs ago): 3
The first line lists information for the client. The other lines list information about the most
recent 802.11 packet detected from the client.
Displaying Rogue Detection Counters
To display rogue detection statistics counters, use the following command:
show rfdetect counters
The command shows counters for rogue activity detected by the switch on which you enter
the command.
D-Link Systems, Inc.
Client AP MAC
Vendor
Unknown Unknown
Unknown
D-Link Unknown
Unknown
Unknown
Unknown
Rogue Detection and Countermeasures
AP Port/Radio
Vendor Channel
dap 1/1/6
dap 1/1/
dap 1/1/149 1 intfr 87
dap 1/1/149 1 intfr 117
dap 1/1/157 1 intfr 162
dap 1/1/1
NoL Type Last
seen
1 intfr 207
1 intfr 155
1 intfr 52
363