Diffserv Show Commands; Show Class-Map - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
Format
Modes

DiffServ Show Commands

Use the DiffServ show commands to display configuration and status information for classes,
policies, and services. You can display DiffServ information in summary or detailed formats.
The status information is only shown when the DiffServ administrative mode is enabled.

show class-map

This command displays all configuration information for the specified class. The
is the name of an existing DiffServ class.
name>
Format
Modes
If the class-name is specified the following fields are displayed:
Class Name
Class Type
Match Criteria The Match Criteria fields are only displayed if they have been configured.
Values
If you do not specify the Class Name, this command displays a list of all defined DiffServ
classes. The following fields are displayed:
Class Name
Class Type
Ref Class Name The name of an existing DiffServ class whose match conditions are being
242 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
no service-policy in <policymapname>
Global Config
Interface Config
show class-map <class-name>
Privileged EXEC
User EXEC
The name of this class.
A class type of 'all' means every match criterion defined for the class is eval-
uated simultaneously and must all be true to indicate a class match.
Not all platforms support all match criteria values. They are displayed in the
order entered by the user. The fields are evaluated in accordance with the class
type. The possible Match Criteria fields are: Destination IP Address, Destina-
tion Layer 4 Port, Destination MAC Address, Ethertype, Source MAC
Address, VLAN, Class of Service, Every, IP DSCP, IP Precedence, IP TOS,
Protocol Keyword, Reference Class, Source IP Address, and Source Layer 4
Port.
The values of the Match Criteria.
The name of this class. (Note that the order in which classes are displayed is
not necessarily the same order in which they were created.)
A class type of 'all' means every match criterion defined for the class is eval-
uated simultaneously and must all be true to indicate a class match.
referenced by the specified class definition.
<class-