D-Link DWS-1008 User Manual page 168

DWS-1008 User's Manual
Changing the Long Retry Threshold
The long retry threshold specifies the number of times a radio can send a long unicast frame
without receiving an acknowledgment for the frame. A long unicast frame is a frame that is
equal to or longer than the RTS threshold.
To change the long retry threshold, use the following command:
set radio-profile name long-retry threshold
The threshold can be a value from 1 through 15. The default is 5. To change the long retry
threshold for radio profile rp1 to 8, type the following command:
DWS-1008# set radio-profile rp1 long-retry 8
success: change accepted.
Changing the Maximum Receive Threshold
The maximum receive threshold specifies the number of milliseconds a frame received by a
radio can remain in buffer memory. To change the maximum receive lifetime, use the following
command:
set radio-profile name max-rx-lifetime time
The time can be from 500 ms (0.5 second) through 250,000 ms (250 seconds). The default
is 2000 ms (2 seconds).
To change the maximum receive threshold for radio profile rp1 to 4000 ms, type the following
command:
DWS-1008# set radio-profile rp1 max-rx-lifetime 4000
success: change accepted.
Changing the Maximum Transmit Threshold
The maximum transmission threshold specifies the number of milliseconds a frame scheduled
to be transmitted by a radio can remain in buffer memory. To change the maximum transmit
lifetime, use the following command:
set radio-profile name max-tx-lifetime time
The time can be from 500 ms (0.5 second) through 250,000 ms (250 seconds). The default
is 2000 ms (2 seconds).
To change the maximum transmit threshold for radio profile rp1 to 4000 ms, type the following
command:
DWS-1008# set radio-profile rp1 max-tx-lifetime 4000
success: change accepted.
D-Link Systems, Inc.
Configuring DWL-8220AP Access Points
163