D-Link DWS-1008 User Manual page 94

DWS-1008 User's Manual
The IP interface table flags the address assigned by a DHCP server with an asterisk ( * ). In
the following example, VLAN corpvlan received IP address 10.3.1.110 from a DHCP server.
DWS-1008# show interface
* = From DHCP
VLAN Name
--------------------------------------------------------------------------------------------------------------------
4 corpvlan
Displaying DHCP Client Information
To display DHCP client information, type the following command:
DWS-1008# show dhcp-client
Interface:
Configuration Status: Enabled
DHCP State:
Lease Allocation:
Lease Remaining: 65532 seconds
IP Address:
Subnet Mask:
Default Gateway:
DHCP Server:
DNS Servers:
DNS Domain Name:
Disabling or Reenabling an IP Interface
IP interfaces are enabled by default. To administratively disable or reenable an IP interface,
use the following command:
set interface vlan-id status {up | down}
Removing an IP Interface
To remove an IP interface, use the following command:
clear interface vlan-id ip
Note: If you remove the IP interface that is being used as the system IP address, features
that require the system IP address will not work correctly.
Displaying IP Interface Information
To display IP interface information, use the following command:
show interface [vlan-id]
D-Link Systems, Inc.
Configuring and Managing IP Interfaces and Services
Address Mask
*10.3.1.110 255.255.255.0
corpvlan(4)
IF_UP
65535 seconds
10.3.1.110
255.255.255.0
10.3.1.1
10.3.1.4
10.3.1.29
mycorp.com
Enabled State RIB
YES Up ipv4
89