D-Link DWS-1008 User Manual page 374

DWS-1008 User's Manual
The following command displays the files in the old subdirectory:
DWS-1008# dir old
=============================================================
file:
Filename
file:configuration.txt
file:configuration.xml
Total:
Copying a File
You can perform the following copy operations:
• Copy a file from a TFTP server to nonvolatile storage.
• Copy a file from nonvolatile storage or temporary storage to a TFTP server.
• Copy a file from one area in nonvolatile storage to another.
• Copy a file to a new filename in nonvolatile storage.
To copy a file, use the following command.
copy source-url destination-url
A URL can be one of the following:
• [subdirname/]filename
• file:[subdirname/]filename
• tftp://ip-addr/[subdirname/]filename
• tmp:filename
The filename and file:filename URLs are equivalent. You can use either URL to refer to a file
in a switch's nonvolatile memory.
The tftp://ip-addr/filename URL refers to a file on a TFTP server. If DNS is configured on
the switch, you can specify a TFTP server's hostname as an alternative to specifying the IP
address.
The tmp:filename URL refers to a file in temporary storage. You can copy a file out of
temporary storage but you cannot copy a file into temporary storage.
The subdirname/ option specifies a subdirectory.
If you are copying a system image file into nonvolatile storage, the destination-url must
include the boot partition name. You can specify one of the following:
• boot0:/filename
• boot1:/filename
You must specify the boot partition that was not used to load the currently running image.
D-Link Systems, Inc.
Size Created
3541 bytes Sep 22 2003, 22:55:44
24 KB Sep 22 2003, 22:55:44
27 Kbytes used, 207824 Kbytes free
Managing System Files
369