Displaying And Clearing Network Sessions - D-Link DWS-1008 User Manual

DWS-1008 User's Manual
To clear the administrative sessions of Telnet clients, use the following command:
clear sessions telnet [client [session-id]]
You can clear all Telnet client sessions or a particular session. For example, the following
command clears Telnet client session 1:
DWS-1008# clear sessions telnet client 1

Displaying and Clearing Network Sessions

Use the following command to display information about network sessions:
show sessions network [user user-glob | mac-addr mac-addr-glob | ssid ssid-name |
vlan vlan-glob | session-id session-id | wired] [verbose]
In most cases, you can display both summary and detailed (verbose) information for a session.
For example, the following command displays summary information about all current network
sessions:
DWS-1008# show sessions network
User
Name
------------------------------
EXAMPLE\wong
jose@example.com
00:30:65:16:8d:69
5 sessions total
An asterisk (*) in the Sess ID field indicates a session that is currently active.
You can display and clear network sessions in the following ways:
• By the name of the user.
• By the MAC address of the user.
• By the name of the VLAN to which the user belongs.
• By the local session ID.
D-Link Systems, Inc.
Sess IP or MAC
ID Address
------- ------------------------ -------------
5* 192.168.12.100
5125* 192.168.12.141
4385* 192.168.19.199
761 00:0b:be:15:46:56 (none)
763 00:02:2d:02:10:f5
Managing Sessions
VLAN Port/
Name Radio
---------
vlan-eng 3/1
vlan-eng 1/1
vlan-wep 3/1
1/2
(none) 1/1
340