D-Link DWS-1008 User Manual page 407

DWS-1008 User's Manual
Class
Vendor-
Specific
Session-
Timeout
Called-
Station-
Id
Calling-
Station-Id
NAS-
Identifier
Acct-Status-
Type
Acct-Delay-
Time
D-Link Systems, Inc.
25 Yes No
26 Yes No
27 Yes No
30 No Yes
31 No Yes
32 No Yes
40 No No
41 No No
Appendix B - Supported RADIUS Attribites
Yes If received, this information must be
sent on, without interpretation, in all
subsequent packets sent to the RADIUS
server for that client session.
Yes String. Allows MSS to support D-Link
VSAs.
Maximum number of seconds of service
allowed the user before reauthentication
of the session.
Note. If the global reauthentication
timeout (set by the set dot1x reauth-
period command) is shorter than the
session-timeout, MSS uses the global
timeout instead.
Yes
For IEEE 802.1X authenticators, stores
the DWL-8220AP access point MAC
address in uppercase ASCII format, with
octet values separated by hyphens (for
example, 00-10-A4-23-19-C0).
Yes For IEEE 802.1X authenticators,
stores the supplicant MAC address
in uppercase ASCII format, with octet
values separated by hyphens (for
example, 00-10-A4-23-19-C0).
No Name of the RADIUS client originating
an Access-Request. The value in the
current release is trapeze and cannot be
changed.
Yes Valid values:
• Acct-Start
• Acct-Interim-Update
• Acct-Stop
Yes Time in seconds for which the client has
been trying to send the record.
402