D-Link DWS-1008 User Manual page 118

DWS-1008 User's Manual
DWS-1008# show ip route
Router table for IPv4
Destination/Mask
-------------------------------------------------------------------------------------------------------------------------
0.0.0.0/ 0
10.10.10.10/24
10.10.10.10/32
10.20.10.10/24
10.20.10.10/32
224.0.0.0/ 4
4. Configure the DNS domain name and DNS server entries, enable the DNS service, and
verify the configuration changes. Type the following commands:
DWS-1008# set ip dns domain example.com
success: change accepted.
DWS-1008# set ip dns server 10.10.10.69 PRIMARY
success: change accepted.
DWS-1008# set ip dns server 10.20.10.69 SECONDARY
success: change accepted.
DWS-1008# set ip dns enable
success: change accepted.
DWS-1008# show ip dns
Domain Name: example.com
DNS Status: enabled
IP Address
-----------------------------------
10.10.10.69
10.20.10.69
5. Configure time zone, summertime, and NTP parameters and verify the configuration
changes. Type the following commands:
DWS-1008# set timezone PST -8
success: change accepted.
DWS-1008# show timezone
Timezone is set to 'PST', offset from UTC is -8:0 hours.
DWS-1008# set summertime PDT
success: change accepted.
D-Link Systems, Inc.
Configuring and Managing IP Interfaces and Services
Proto Metric NH-Type Gateway
Static 1 Router
IP 0 Direct
IP 0 Local
IP 0 Direct
IP 0 Local
IP 0 Local
Type
PRIMARY
SECONDARY
VLAN:Interface
10.20.10.1
vlan:1:ip
vlan:1:ip:10.10.10.10/24
vlan:1:ip
vlan:1:ip:10.20.10.10/24
MULTICAST
113