Displaying Rf Detection Information - D-Link DWS-1008 User Manual

DWS-1008 User's Manual

Displaying RF Detection Information

You can use the CLI commands listed in the table below to display rogue detection
information.
Command
show rfdetect clients
[mac mac-addr]
show rfdetect counters
show rfdetect data
show rfdetect visible mac-addr
show rfdetect visible
ap ap-num [radio {1 | 2}]
show rfdetect visible
dap dap-num [radio {1 | 2}]
show rfdetect vendor-list
show rfdetect ssid-list
show rfdetect black-list
show rfdetect attack-list
show rfdetect ignore
D-Link Systems, Inc.
Description
Displays all wireless clients
detected on the air.
Displays statistics for rogue
and Intrusion Detection System
(IDS) activity detected by the
APs managed by a switch.
Displays information about all
BSSIDs detected on the air,
and labels those that are from
rogues or interfering devices.
Displays the BSSIDs detected
by a specific D-Link radio.
Displays the list of OUIs that are
allowed on the network. An OUI
identifies a piece of networking
equipment's vendor.
Displays the list of SSIDs that
are allowed on the network.
Displays the list of wireless
clients that are both allowed on
the network.
Displays the list of wireless
devices that you want APs to
attack with countermeasures.
Displays the BSSIDs of third-
party devices that MSS ignores
during RF detection scans.
Rogue Detection and Countermeasures
362