Chapter 2 High-Speed Counter Module Fb; M+Fx5-2Hc_Countenable (Count Enable Operation); Overview; Labels - Mitsubishi Electric MELSEC iQ-F Series Manual

2
HIGH-SPEED COUNTER MODULE FB
2.1
M+FX5-2HC_CountEnable (Count Enable
Operation)

Overview

This FB executes the count operation (Count start/stop) on a specified channel.
M+FX5-2HC_CountEnable
(1)
B:i_bEN
(2) DUT:i_stModule
(3)
UW:i_uCH

Labels

Input label
No. Label Label name
(1) i_bEN Execution
command
(2) i_stModule Module label
(3) i_uCH Target channel
Output label
No. Label Label name
(4) o_bENO Execution status
(5) o_bOK Normal completion
(6) o_bErr Error completion
(7) o_uErrId Error code
(8) o_bCountStart Count in operation flag
(4)
o_bENO:B
o_bErr:B (5)
o_uErrId:UW (6)
o_bErr:B (7)
o_bCountStart:B (8)
Data type Import
Bit Always
Structure At FB start
Word [Unsigned]/Bit At FB start
String [16-bit]
Data type
Bit
Bit
Bit
Word [Unsigned]/Bit String
[16-bit]
Bit
Range Description
On or off On: The FB is activated.
Off: The FB is not activated.

Specify the module label of the MELSEC iQ-F
high-speed counter module.
1 to 2 1 or 2: Specify the channel number.
Default Description
value
Off On: The execution command is on.
Off: The execution command is off.
Off When this label is on, it indicates that the FB has
been completed normally.
Off When this label is on, it indicates that an error
has occurred in the FB.
0 Stores the error code that occurred in the FB.
Off On: The count operation is on.
Off: The count operation is off.
2 HIGH-SPEED COUNTER MODULE FB

2.1 M+FX5-2HC_CountEnable (Count Enable Operation)

2
9