Table of Contents
Advertisement
Setting the maximum length of RIP packets
CAUTION:
The supported maximum length of RIP packets varies by vendor. Use this feature with caution to
avoid compatibility issues.
The packet length of RIP packets determines how many routes can be carried in a RIP packet. Set
the maximum length of RIP packets to make good use of link bandwidth.
When authentication is enabled, follow these guidelines to ensure packet forwarding:
•
For simple authentication, the maximum length of RIP packets must be no less than 52 bytes.
•
For MD5 authentication (with packet format defined in RFC 2453), the maximum length of RIP
packets must be no less than 56 bytes.
•
For MD5 authentication (with packet format defined in RFC 2082), the maximum length of RIP
packets must be no less than 72 bytes.
To set the maximum length of RIP packets:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Set the maximum length of
RIP packets.
Setting the DSCP value for outgoing RIP packets
The DSCP value specifies the precedence of outgoing packets.
To set the DSCP value for outgoing RIP packets:
Step
1.
Enter system view.
2.
Enter RIP view.
3.
Set the DSCP value for
outgoing RIP packets.
Configuring RIP GR
GR ensures forwarding continuity when a routing protocol restarts or an active/standby switchover
occurs.
Two routers are required to complete a GR process. The following are router roles in a GR process:
•
GR restarter—Graceful restarting router. It must have GR capability.
•
GR helper—A neighbor of the GR restarter. It helps the GR restarter to complete the GR
process.
After RIP restarts on a router, the router must learn RIP routes again and update its FIB table, which
causes network disconnections and route reconvergence.
Command
system-view
interface interface-type
interface-number
rip max-packet-length value
Command
system-view
rip [ process-id ] [ vpn-instance
vpn-instance-name ]
dscp dscp-value
38
Remarks
N/A
N/A
By default, the maximum length of
RIP packets is 512 bytes.
Remarks
N/A
N/A
By default, the DSCP value for
outgoing RIP packets is 48.
Advertisement
Table of Contents
Troubleshooting
