Ipv6 Dns Configuration Commands; Display Dns Ipv6 Server - HP A5120 EI Series Command Reference Manual

IPv6 DNS configuration commands

display dns ipv6 server

Syntax
display dns ipv6 server [ dynamic ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
dynamic: Displays IPv6 DNS server information acquired dynamically through DHCP or other protocols.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display dns ipv6 server command to display IPv6 DNS server information.
Examples
# Display IPv6 DNS server information.
<Sysname> display dns ipv6 server
Type:
D:Dynamic
DNS Server
1
2
Table 23 Output description
Field
DNS Server
Type
IPv6 Address
S:Static
Type IPv6 Address
S 1::1
S FE80::1
Description
Sequence number of the DNS server, which is assigned automatically by the
system, starting from 1
Type of the DNS server: ―S‖ represents a statically configured DNS server, and
―D‖ represents a DNS server obtained dynamically through DHCP or other
protocols.
IPv6 address of the DNS server
104
(Interface Name)
Vlan999