Display Spbm Peer - HP FlexFabric 5930 Series Command Reference Manual

Command output
1.
Field
NSR phase

display spbm peer

Use display spbm peer to display ISIS-SPB neighbor information.
Syntax
display spbm peer [ system-id system-id ] [ verbose ] [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
system-id system-id: Specifies a neighbor by its system ID in XXXX.XXXX.XXXX format. If you do not
specify a system ID, the command displays information about all ISIS-SPB neighbors.
verbose: Displays detailed information. If you do not specify this keyword, the command only displays
brief information.
standby slot slot-number: Specifies a subordinate device by its IRF member ID. If you do not specify a
subordinate device, the command displays information for the master device.
Examples
# Display brief information about all ISIS-SPB neighbors.
<Sysname> display spbm peer
System ID
5555.1111.1111
5555.1111.2222
# Displays detailed information about all ISIS-SPB neighbors.
<Sysname> display spbm peer verbose
Description
NSR phase:
•
Initialization—ISIS-SPB NSR is initialized.
•
Smooth—ISIS-SPB NSR smooth starts.
•
LSP stability—The local LSDB is converging.
•
LSP generation—ISIS-SPB generates and floods LSPs.
•
SPF computation—ISIS-SPB performs SPF computation.
•
Flush smooth—ISIS-SPB smoothes kernel data.
•
Finish—ISIS-SPB NSR is finishing.
Peer information for SPBM
-------------------------
Port
FGE1/0/2
FGE1/0/3
Peer information for SPBM
-------------------------
Circuit ID
1
1
38
State Holdtime
Up 28s
Up* 20s