Peer Allow-As-Loop (Mbgp Address Family View); Peer As-Path-Acl (Mbgp Address Family View) - HP 3600 v2 Series Command Reference Manual

peer allow-as-loop (MBGP address family view)

Syntax
peer { group-name | ip-address } allow-as-loop [ number ]
undo peer { group-name | ip-address } allow-as-loop
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
ip-address: Specifies the IP address of an IPv4 MBGP peer.
number: Specifies the number of times the local AS number can appear in routes from the peer or the
peer group, in the range of 1 to 10. The default number is 1.
Description
Use peer allow-as-loop to allow the local AS number to exist in the AS_PATH attribute of routes from a
peer or a peer group, and to configure the number of times that the local AS number can appear.
Use undo peer allow-as-loop to remove the configuration.
By default, the local AS number is not allowed.
Related commands: display bgp multicast routing-table peer.
Examples
# In IPv4 MBGP address family view, configure the number of times that the local AS number can appear
in routes from the peer 1.1.1.1 as 2.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 1.1.1.1 as-number 200
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer 1.1.1.1 enable
[Sysname-bgp-af-mul] peer 1.1.1.1 allow-as-loop 2

peer as-path-acl (MBGP address family view)

Syntax
peer { group-name | ip-address } as-path-acl as-path-acl-number { export | import }
undo peer { group-name | ip-address } as-path-acl as-path-acl-number { export | import }
View
IPv4 MBGP address family view
Default level
2: System level
236