Peer Advertise-Ext-Community (Ipv6 Mbgp Address Family View); Peer Allow-As-Loop (Ipv6 Mbgp Address Family View) - HP 6125G Command Reference Manual

peer advertise-ext-community (IPv6 MBGP address family view)

Syntax
peer { ipv6-group-name | ipv6-address } advertise-ext-community
undo peer { ipv6-group-name | ipv6-address } advertise-ext-community
View
IPv6 MBGP address family view
Default level
2: System level
Parameters
group-name: Name of an IPv6 MBGP peer group, a string of 1 to 47 characters.
ipv6-address: Specifies an IPv6 MBGP peer by its IP address.
Description
Use peer advertise-ext-community to advertise the extended community attribute to an IPv6 MBGP peer
or a peer group.
Use undo peer advertise-ext-community to remove the configuration.
By default, no extended community attribute is advertised to any IPv6 MBGP peer or peer group.
Examples
# Advertise the extended community attribute to the IPv6 MBGP peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 enable
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 advertise-ext-community

peer allow-as-loop (IPv6 MBGP address family view)

Syntax
peer { ipv6-group-name | ipv6-address } allow-as-loop [ number ]
undo peer { ipv6-group-name | ipv6-address } allow-as-loop
View
IPv6 MBGP address family view
Default level
2: System level
Parameters
ipv6-group-name: Specifies an IPv6 MBGP peer group by its name, a string of 1 to 47 characters.
ipv6-address: Specifies an IPv6 MBGP peer by its IP address.
387