Enable (Igmp-Snooping View); Entry-Limit (Igmp-Snooping View) - HP 5900 Series Command Reference Manual

enable (IGMP-snooping view)

Use enable to enable IGMP snooping for VLANs.
Use undo enable to di
Syntax
enable vlan vlan
und o enable vlan vlan-list
Default
IGMP snooping is disabled in a VLAN.
Views
IGMP-snooping view
Predefine d user roles
network-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The value range for the VLAN ID is 1
to 4094.
Usage guid elines
You must enable IGMP snooping globally before you enable IGMP snooping for VLANs.
This command and the igm
ranges:
• The enable command in IGMP-snooping view ta
The igm
•
For a VLAN, the enab
have the same priority, and th
Examples
# Enable IGMP snooping globally, and enable IG
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] enable
Related c ommands
• igmp-snooping
igmp-snoop
•
entry- limit (IGMP-snooping view)
Use entry-limit to set the glo
dynamic entries and static entries.
Use undo entry-limit to
sable IGMP snooping for VLANs.
-list
p-snooping enable command have the same function but different effective
p-snooping enable command takes effect on the current VLAN.
le command in IGMP-snooping view and the igmp-snooping enable command
e most recent configuration takes effect.
ing enable
bal maximum number of IGMP snooping forwarding entries, including
restore the default.
kes effect on the specified VLANs.
MP snooping for VLAN 2 through VLAN 10.
vlan 2 to 10
14
specifies a VLAN by its