Covers; Basic System; Horizontal Carriage Cover - Siemens SIREMOBIL Iso-C Troubleshooting Manual

20

Covers

WARNING

Basic system

Removing the cover
Apply the foot brake.
Remove the screws from the cover.
Pull the cover back.
Unscrew the protective conductor from the cover.
Pull the cover completely off and remove it.
Installing the cover
Reattach the ground wire to the back cover.
Push the cover forward.
Replace the cover and tighten the screws.

Horizontal carriage cover

Fig. 5:
Removing the cover
SIREMOBIL Iso-C
Electrical voltage!
Refer to (Safety information / p.
Disconnect the line voltage plug prior to removing cov-
ers.
SPR2-230.840.01.01.02
08.08
11).
Fig. 6:
Page 20 of 148
CS PS SP
Prerequisites
1.5
0
0
© Siemens, 2008
For internal use only