Table of Contents
Advertisement
use the character spacing set through Options 1 and 2. If
Option 6 is on, the printer will use the character spacing
of the font in use. (Refer to the status summary sheet for
the character spacing of the fonts.)
Use Font Spacing
GROUP
TOGGLE
D
on
E
Epson Emulation Options
(Group E)
The Group E Options control the printer during Epson
Emulation Mode.
NOTE: These Options will apply only if your printer
emulates the Epson FX-80. If it does not emulate Ep-
son, see the Options listed under Group I - Pro printer
Emulation Mode.
The printer must be in Epson Emulation Mode before
these Options will take effect. See Group 1 Options 1,
2 and 3 for instructions for selecting Epson Emulation
Mode.
Toggle Option 0 of any Group to save changes to
Printer Setup.
t=
Factory
setting
Printer Setup
3-23
Advertisement
Table of Contents
