Table of Contents
Advertisement
C.I
Print Modes
The Print Modes Commands are used to change character
modes and spacing.
The printer emulates the 10 CPI, 12 CPI, and Compressed
print widths of the IBM Proprinter. Like the Proprinter,
only one Print Width can be used at a time. The number
of characters that will fit on a line is determined by the
font size, the print mode (CPI) selected, the page size, and
the page orientation.
The IBM Proprinter Print Qualities that are emulated by
the printer are: Normal, Emphasized, Double-Strike, Su-
perscript, Subscript, Condensed, and Near Letter Quality.
The underscore and overs core capability may be combined
with any of the other print qualities.
Unlike the Proprinter, Print Quality Commands for Em-
phasized Mode, Double-Strike Mode, and Underline Mode
will not reduce the printer's print speed. All Print Quality
Commands will remain on until they are disabled by the
appropriate command or until the printer is powered-off.
All combinations of Print Modes are valid with the fol-
lowing exceptions:
Combinations
Results
Condensed, Emphasized
Emphasized
Condensed, 12 CPI
12 CPI
Condensed, Near Letter Condensed
Quality
Condensed, Near Letter Near Letter Quality,
Quality, Emphasized
Emphasized
10 CPI, 12 CPI
Last Mode Selected
Superscript, Subscript
Last Mode Selected
Proprinter Emulation Mode
F-7
Advertisement
Table of Contents
