Table of Contents
Advertisement
I
<ESC>71 PRINT SUPPRESSION "ON"
When Print Suppression is "ON" all printable characters
are replaced by spaces. This command does not affect
ESCape and Control sequences. It is cleared with a <CR>.
I
<ESC>31 GRAPHICS "ON"
This command is used to enter Graphics Mode. Once in
Graphics Mode, certain conditions change. The print po-
sition does not automatically move after each character is
printed when in Graphics Mode. Space, Back space and
Tab commands cause movement of the print position in
increments of 1/60 inch. The Line Feed command causes
movement in 1/48 inch increments. Vertical Tab, Form
Feed, Top-of-Form, Forward and Reverse
1/2
Line Feed
and margin commands are unchanged by Graphics Mode.
A Carriage Return as well as the Graphics "OFF" com-
mand will exit Graphics Mode.
I
<ESC>41 GRAPHICS "OFF"
Either this command or a Carriage Return will exit you
from Graphics Mode and return you to the normal oper-
ating mode.
I
<Esc>sl FORWARD PRINTING
This command is used to return character printing to the
forward direction. Forward Printing is the default condi-
tion so the command is actually used to discontinue Re-
verse Printing.
Diablo Emulation Mode
D-21
Advertisement
Table of Contents
