Table of Contents
Advertisement
alent. This simplifies the entering of the special ESCape
sequences required for accessing the software commands.
These software commands are explained in detail in Part
IV of this manual.
A
Summary of Supported Ep-
son Commands
There are eight categories of supported Epson Emulation
Mode commands: Print Width, Print Quality, Print Modes,
Paper Feed, Forms Control, Formatting, Special Features,
and Graphics. The supported commands are listed on the
next few pages as a means of quick reference. The mean-
ings of the categories and the commands will be explained
later in this section.
When using the supported commands, refer to the ASCII
conversion table in Appendix B at the back of this manual
to determine the value for "n" in those commands which
require variable parameters. Use the appropriate conver-
(
sion value (ASCII, Hex, Decimal, etc.) required by your
computer system and the programming language being
used.
Print Width Commands
<ESC>M
Enable Elite Mode
<ESC>P
Disable Elite Mode
<ESC><SI>
Enable Compressed Mode
<SI>
Enable Compressed Mode (decimal 15)
<De2>
Disable Compressed Mode (decimal 18)
E-2
Appendix E
Advertisement
Table of Contents
