Table of Contents
Advertisement
I
<ESC>&kn
I
S
I
Compressed Print
This command switches both primary and secondary fonts
between available standard and compressed fonts. For ex-
ample, if you have 12 and 16.66 pitch fonts available, the
command is used as follows:
Command
Action
<ESC>&kOS
Select standard pitch (12 cpi)
<ESC>&k2S
Select compressed pitch (16.66 cpi)
I
<ESC>nlsn
2
V
I
Character Size
This command sets the size of the primary or secondary
font. Parameter nlselects the primary or secondary font,
and n2 is the desired character size in points (1/72-inch),
with up to two decimal places of precision. Examples are
provided in the table below:
Character Size
8-point
lO-point
14.4-point
Command for Font:
Primary
Secondary
<ESC>(s8V
<ESC»s8V
<ESC>(slOV
<ESC»slOV
<ESC>(s14.4V
<ESC»s14.4V
If
none of the available fonts has the specified character
size, the font with the closest size will be substituted.
I
<ESC>nl sn
2
S
I
Character Style
This command specifies upright or italic printing for the
primary or secondary font. Parameter nl selects the pri-
mary or secondary font, and n2 is the desired character
style, according to the table below:
H-28
Character Style
Upright
Italic
Command for Font:
Primary
Secondary
<ESC>(sOS
<ESC> )sOS
<ESC>(slS
<ESC> )s1S
HP Emulation Mode
Advertisement
Table of Contents
