Table of Contents
Advertisement
E.2
Using the Command
This command lets you to tell the printer to print more
than one copy per job. The number of copies may be set
at any value between one and 5000.
• The copy count set using this command remains in
effect until a new copy count command is sent, a
warm restart (Option 0) is performed, or until power
is turned off.
• A value of 0 or omitting a value for
nl
selects one
copy (default).
• Values greater than 5000 cause the command to be
ignored.
E.3
Examples
LPRINT CHR$ (27) ;" [lOu"
Sets copy count to 10.
LPRINT CHR$ (27) ;" [5050u"
Command is ignored due
to invalid parameter.
LPRINT CHR$ (27) ; " [u"
Sets copy count to 1 (default).
4-8
Software Commands
\
Advertisement
Table of Contents
