QMS SmartWriter 80+ User Manual page 277

I
<ESC>SO
I
SUPERSCRIPT
When Superscript Mode is enabled, characters will be
printed full-size but raised above the normal print line.
Superscript characters are always printed in Double-
Strike. Superscript cannot be used with Proportional
Mode. Superscript Mode stays on until the command to
terminate is received.
I
<ESC>Sll
SUBSCRIPT
When Subscript Mode is enabled, characters will be printed
full-size but lowered below the normal print line. This dif-
fers slightly from the FX-80 which prints subscript char-
acters at half the size of normal characters. Subscript
characters are always printed in Double-Strike. Sub-
script cannot be used with Proportional Mode. Sub-
script Mode stays on until the command to terminate is
received.
I
<ESC>T
I
DISABLE SUPERSCRIPT/SUBSCRIPT MODE
This command terminates either Superscript or Subscript
Mode. This command returns the printer to Single-Strike
unless Double-Strike was enabled before entering Super-
script or Subscript Mode. In that case, the printer will be
returned to Double-Strike Mode.
Examples:
The example below was generated by the
following input:
E
=
mc<ESC>S02
<ESC>TH<ESC>S12<ESC>TO
E =
mc
2
Appendix E
E-15