Table of Contents
Advertisement
Value
o
1
2
3
4
5
Paper Source
Unchanged
Paper from tray #1
Paper from manual feed
Envelope from manual feed
Paper from tray #2
Paper from tray #3
The default value is 1. Any invalid parameter value will
cause the current page to be printed and the paper source
is unchanged.
Values of
4
or 5 are only applicable to printers equipped
with multiple paper trays, with the trays enabled from
the front-panel keypad. Trays are numbered from top to
bottom, starting with the standard printer tray.
9
These commands always cause the current page
to
be
printed by executing a carriage return and form feed. The
selected paper source continues in effect until changed.
If manual feed is selected, the indicator in the
I
MANUAL
FEED
I
key will light and the display on the
\
printer's front panel will read~.
\
A value of 3 in the paper source command results in the
same display as manual feed.
J.2
Printing Envelopes
The following sequence is recommended when printing
envelopes:
1. Send <ESC>&I10 to select landscape orientation.
2. Send
<ESC>&13H
to select envelope feed.
9Trays #2 and #3 do not support paper tray sizing, so paper size com-
mands are ignored.
H-58
HP Emulation Mode
Advertisement
Table of Contents
