Due to the greater dot resolution of the QMS printer,
characters are always solid lines and will never appear
to be constructed of dots.
• CONDENSED MODE ON causes printing at 17.1
CPI.
• SET 12 CPI PRINTING causes printing at 12 CPI.
• 10 CPI PRINTING returns the printer to 10 CPI.
• BEGIN EMPHASIZED PRINTING causes the char-
acters to be printed slightly darker and wider than
nonnal.
• CANCEL EMPHASIZED PRINTING ends empha-
sized printing.
• BEGIN DOUBLE STRIKE PRINTING causes char-
acters to be printed slightly darker but no wider than
nonnal.
• CANCEL DOUBLE STRIKE PRINTING returns the
printer to single strike printing.
F-8
• SELECT PRINT MODE selects the print quality:
Nonnal (standard or download font); Near Letter
Quality (standard or download font).
• SUPERSCRIPT causes the characters to be printed
slightly above the nonnal baseline.
• SUBSCRIPT causes characters
to
be printed slightly
below the nonnal baseline.
• CANCEL SUPERSCRIPT/SUBSCRIPT cancels the
above two commands.
• BEGIN CONTINUOUS UNDERSCORE underlines
all following data and spaces.
Proprinter Emulation Mode