Table of Contents
Advertisement
I
<ESC>I
I
UNDERSCORE MODE "ON"
This command will cause Underscoring of characters, words,
phrases, sentences or whole paragraphs beginning at the
point where this command is received. Underscore Mode
continues for subsequent lines until it is terminated by
the Underscore Mode "OFF' command described next.
Spaces which have been Tabbed over will be Underscored.
I
<ESC>J
I
UNDERSCORE MODE "OFF"
This command causes the Underscore Mode to be turned
"OFF'.
I
<ESC>Kn
I
BOLD OVERPRINT "ON"
The Bold Overprint command will cause each character
that follows to be printed a second time after a 1 dot
move Vertically. The Qume values from. 1 to 4 (n) for
this parameter will actually only cause each character to
be printed twice. The character will appear to be darker
or bolder. Bold Overprint will continue until it is turned
"OFF' using the command below.
I
<ESC>M
I
BOLD OVERPRINT "OFF"
This command turns Bold Overprint "OFF".
I
<ESC>Q
I
SHADOW PRINT "ON"
Shadow Printing causes each character to be printed twice,
with the second printing being moved 1 dot Horizontally
to the right of the first printing.
If
WPS Mode is "ON",
Shadow Print will also be Proportionally Spaced. Shadow
Print will cause a line of text to be slightly longer than the
same line printed with Shadow Print "OFF". IfWPS Mode
0-26
Qume Emulation Mode
Advertisement
Table of Contents
