Table of Contents
Advertisement
A value of 0 sets the character set for the secondary font
to the default character set.
A value of 1 sets the character set for the secondary font
to that of the default primary font.
A value of 2 sets the secondary font character set to that
of the current primary font.
A value of 3 sets the secondary font to the default sec-
ondary font, and invokes its default characteristics. If the
new font is proportionally spaced, the pitch is not changed.
The above actions operate within the constraints of the
current orientation.
I
<ESC>*cOF
I
Delete All Fonts
This command deletes all downloaded fonts - temporary
and permanent - from printer memory. That is, all previ-
ously assigned font ID's are made unassigned.
I
<ESC>*clF
I
Delete Temporary Fonts
This command deletes all downloaded temporary fonts
from printer memory. That is, font ID's previously as-
signed to temporary fonts are made unassigned.
I
<ESC>*c2F
I
Delete Current Font
This command deletes from printer memory the most re-
cently selected downloaded font.
NOTE: All pages buffered in the printer will be printed
before font deletion actially occurs. If a font used on the
current page is deleted, the default font last entered from
the printer keypad will be substituted.
HP Emulation Mode
H-33
Advertisement
Table of Contents
