Table of Contents
Advertisement
C.4
Tab Commands
The Tab Commands are used to position the printed ma-
terial on the page as desired.
• SET VERTICAL TABS establishes up to 64 different
vertical tab stops in one command.
• VERTICAL TAB moves the current position to the
next vertical tab stop.
• CLEAR ALL VERTICAL TABS cancels the set ver-
tical tabs.
• SET HORIZONTAL TABS establishes up to 28 dif-
ferent horizontal tab stops in one command.
• HORIZONTAL TAB moves the current position to
the next horizontal tab stop.
• CLEAR ALL HORIZONTAL TABS cancels the set
horizontal tabs.
I
<ESC>B<n
1
><n2> ... <n64><NUL>
I
SET VERTICAL TABS
Sets the vertical tab stop positions in lines. At power
up the printer has no vertical tabs set. <nl> through n64
represent tab stop positions by line number. (The line
at the top of the form is line 1.) This sequence cancels
all previous tab settings. The printer recognizes up to 64
positions in ascending order. Once tab stops are set, they
remain in effect until new tab stops are specified.
Examples:
<ESC>B<ENQ><SP><NUL>
Set Vertical Tabs at
lines 5 and 32.
<ESC>B<SI><RS>-=<NUL>
Set Vertical Tabs at
lines 15, 30, 45, and
61.
Proprinter Emulation Mode
F-15
Advertisement
Table of Contents
