Table of Contents
Advertisement
I
<ESC>*Cnl V
I
Pattern Height (Decipoints)
I
<ESC>*cnlH
I
Pattern 'Vidth (Decipoints)
These commands are identical to the previous two com-
mands, except that dimensions are specified in decipoints
(l/720-inch) instead of dots (l/300-inch). Dimensions are
converted from decipoints to dots, with non-integer values
being rounded up to the next whole number.
I
<ESC>*cnl G
I
Select Pattern
This command is not necessary to print a solid rule.
To select gray scale shading, parameter nlmust be between
1 (prints a solid white pattern) and 100 (prints a solid black
pattern). Commands with invalid parameters are ignored.
~
Pattern 1
==
Pattern 2
I I
Pattern 5 -
'»«
'0<
X
><X<
Pattern 6
(X)<
Figure H.4. Line Pattern Examples
To select a predefined line pattern, parameter nlmust be
between 1 and 6 (see Figure HA). These patterns are
internally stored in the printer.
HP Emulation Mode
H-49
Advertisement
Table of Contents
